aem tuning – Tuning: AEM FIC Fuel Map Steps!
Creating Base AEM FIC Fuel Map Steps
Are you looking for how to create base AEM FIC Fuel Map Steps? If you do, then you have come to the right place. By looking at these steps, you will be able to set and adjust the base fuel map by yourself according to what you need. You can also be able to visualize the numbers that you need to input in the cells.
The first thing that you need to do is to identify the maximum of the boost that will be produced by the turbo. For your information, it is recommended to have at least 125% fuel at 30 PSIA. If the maximum boost that you have is around 20 PSIA, then you need to pump it up until 50% so that the AEM FIC can hold the fuel injector to open for a longer time.
The next step to create base AEM FIC Fuel Map Steps is that you need to add the emergency buffer. In this case, if the maximum boost is at 50%, then you need to add around 75% over the PSIA scale. Then, you need to use the calculation function to fill the gap between the max buffer and max boost. To do this, you can just highlight all of the cells then right-click and choose to calculate.
Next, you will see that the boost will begin at 15 PSIA. In this case, you will have to search around for the atmospheric pressure to discover the right state for you. If you see any decimal numbers, let them be. It is completely normal and will not affect anything. The final step in creating AEM FIC Fuel Map Steps will be you need to calculate the gap that exists between the first boos to max boost. If you are still confused, you might want to create the base map automatically.
V2 Tuning, AEM
Electronics, AEM Tuning
Guide, AEM Tuning
School, AEM Tuning